"User friendly, pleasing look, faultless sound....first class all around!"

CSA 29 INTEGRATED AMPLIFIER

CSA29 combines the benefits of both valves and transistor amplification using the synergic design concept that has made Copland hybrid amplifiers widely acclaimed.

The amplifier uses two valves in the input differential stage, allowing the notably smooth and transparent properties of the valves to blend with the power and dynamics of the transistor electronics. The amplifier delivers 2x85 watts continuous power into 8 ohm. The massive 600W AC transformer and large power supply ensures that the amplifier has more than sufficient drive for a wide range of speakers.

For the vinyl enthusiast we have designed a plug-in phono module, which can be added at your dealer as an optional extra. Employing only discrete components in an active RIAA correction circuitry with low noise input fet-transistors, this is an outstanding phono stage that will provide even more nuances from your treasured vinyl recordings.

The system remote supplied will also control the Copland CDA822 CD player.

3995.00 USD

SPECIFICATION TABLE

Vacuum tubes

Rated power

THD less than

Power bandwidth

Frequency response

Input sensitivity

Input impedance

S/N ratio (IHF-A curve)

Power consumption

Nominal mains voltage
/

Mains voltage range

Dimensions (mm.)

Weight

 

2 x 6922

85W / channel at 8 ohms

0,05 % at all levels

20 Hz 20 kHz 0,2 dB

10 Hz 100 kHz 0,5 dB

230 mV for rated power

39 K ohms

More than 95 dB

400 W

115V or 230V
factory set for destination country only

12 %

430 (W) 110 (H) 390 (D)

15 kg

Visit COPLAND at www.copland.dk

TEL  519 749 1565     FAX  519 749 2863     EMAIL divergent@divertech.com